Series 154 1 1/2" dry 3 ply link filter

CALL US: 1-800-336-3752
Local: 1-410-543-8802

HVAC Categories

Available in Panels, Links and Special Sizes

	FPM	MERV	Pressure Drop	Dust Holding
Series 152	374	6	0.29 in.w.g.	128 g
Series 153	374	8	0.34 in.w.g.	150 g
Series 154	374	8	0.28 in.w.g.	205 g
Series 640	350	NA	0.36 in.w.g.	210 g

MERV 8 3 Ply 6/15/40 denier synthetic premium grade panel filter with 9 gauge internal wire frame. A dry open web is on the air entering side serving as a 1^st stage prefilter catching larger particles. Smaller particles are caught by the 2^nd ply of finer denier fibers, which is treated with a non-migrating encapsulating tackifier on the inner layer ensures positive dust holding capacity Dry tightly woven exiting layer encloses tackifier and prevents any bypass or fiber break off. Used for commercial and industrial applications requiring higher levels of performance.

Ask a question about these filters!

Are Your Paint Arrestors EPA Compliant?

Effective January 10, 2011, all collision repair businesses must comply with EPA rule 40 CFR Part 63 (6H). With respect to filtration, 40 CFR Part 63 (6H) mandates that any spray booth or prep station must be equipped with paint arrestors demonstrated to achieve at least 98% capture efficiency of paint overspray and a manufacturer's test report must be maintained on-site.

Viskon-Aire, in January 2010, reconfirmed 40 CFR Part 63 (6H) compliance of its entire line of paint arrestors, both fiberglass (SG-15, 107X and XHD) and polyester (PS and Super PS). So as always, you can paint with confidence when you use Viskon-Aire filtration products.

Click Here For Test Reports